operation procedure of stone crusher

Stone crusher is designed for the rapid reduction of rocks into granular particles  The following is the operation procedure of stone crusher

1 The stone crusher should be greased and oiled regularly; this should be done prior to each use To do this, simply turn all grease caps one full turn (clockwise) and put a few squirts of oil in both of the oil cups If grease caps are tight, add more grease

2Check jaws for cleanliness and clean them if needed Loosen the wing nuts and remove the front shield, then loosen the hopper wing nuts (located below the hopper on the left and right of the machine) and move it up and back so that the jaw cam lock is exposed Lift the cam lock up to release the stationary jaw so that it may be lifted straight out If it is jammed, the cam lock may be freed by tapping lightly with a mallet or ballpeen hammer

3 Adjustment of jaw spacing: Turn the circuit breaker (located in the breaker box) to the “ON” position While the crusher is empty, start the machine and allow it to come up to full speed The machine must be adjusted while running Loosen the squarehead bolt (left) This will allow the hand knob (or right) to turn

4 Once the jaws have been set, place a clean sample collection tray under the machine to collect the crushed sample If concerned about contamination of sample material by skin oils and/or perspiration, wear clean, powder free latex (or equivalent) gloves while handling the samples

5 When the crushing process is complete, remove the sample collection tray and transfer its contents to a clean container

6 Prior to next use, clean the crusher and collection tray(s) as described previously When done for the day, make sure the lab is cleaner than it was when you started, that the breaker to the crusher is turned off, lights are out, and door closed and locked

Liming Heavy Industry (Shanghai) is an professional stone crusher supplier, we have manufactured various stone crusher according to customers’ different needs, and we also free technical training for customers’ worker

Contact us if you need more details on Elevator. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Lift、operation procedure of stone crusher. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : stone crusher