Jaw Crusher installation requirement

Jaw crusher is vibrating in large quantities with the machine’s installation on the foundation of steeled concrete structure, which the weight of foundation is 810 times of the machine The foundation’s depth is deeper than the depth of the frozen earth and the foundation drawing supplies the size including the comparative position of the main engine and the foundation bolt for motor is not the working drawing The prepared hole is set apart before the anchor bolt place is installed as the second time reference of bonded tendons The height and size of trough under is decided by the layout manner of material

In order to reduce vibration, when the equipment is installing, the cushioning material which is not thinner than 10mm of rubber belt should be filled up between crusher and concrete foundation and tighten the anchor bolts after the fastness cement of second bonded tendons Meanwhile, the levelness should be admeasured with the level instrument, of which the deviation is less than 2mm of the width in front of the frame front wall of importance This can make sure that the crusher will have the circumstance of unilateral feeding because of the deflecting, which protect the equipment from uneven loads

Apart from the distance between the motor and main engine, the corresponding and parallel between the belt conveyor and the main engine pulley is also examined to ensure that all of the veebelt works with efficiency

The size dimension of layout should be adjusted according to the required granularity of finished product and handling capability The stretched spring should loosen firstly when in adjusting the layout After it is done, the spring swelling degree is adjusted properly in order to prevent the bracket from dropping in working

Product Categories : Iron Ore jaw Crusher