Counterattack crusher hammers
Basic Info
Model No.: TY-K164
Product Description
Counterattack crusher hammer head is the main working parts, in the process of broken play an important role Due to crushing equipment for a long time work under harsh conditions in the environment, the hammer head is directly to the broken parts of material, therefore can cause wear phenomenon, hammer hammer head wear, changing jobs is inevitable Below we address the counterattack crusher hammer head replacement steps
1 Replace the hammer crusher mouth material entered should be removed, so as to avoid debris jam broken cavity impact hammer change jobs
2 To counterattack crusher rotor disc fixed on a suitable location, and then use a special tool cut hammer head fixed bolt and extract, cut net hammer head bump caused by wear and tear on both sides
3 Hold hammer out pin, will remove the hammer, pin shaft, the fixed set of bolts, moved to the side, so as not to affect the construction
4 The new hammer head to crusher, pipes, or crowbar to pry open must hold hammer hammer head, in case of drifting cuts
5 From grate bed to crusher rotor by a pipe, push the hammer head to the right position, pay attention to the hammer head down, and then install a fixed set of and pin, bolt
6 Install the hammer entered should inspect the hammer weight, try to keep the balance of the rotor, installed should be turning to check, after the hammer head is installed to fix all bolts spot welding
7 Disk regulated daughter observe the clearance between the sieve plate and hammer, when need to adjust the sieve plate
Product Categories : Counterattack crusher Counterattack crusher hammers
Premium Related Products
