Double-Shaft Hammer Crushers HDS

Application

Doubleshaft hammer crushers are used mainly in the cement industry for the comminution of soft to mediumhard, but also moist and tough materials: Limestone, Gypsum, Chalk, Clay andMarl,

as well as Lignite and Pit Coal The crushing of the feed material is effected by percussion, impact and shear forces

Equipment

Two counterrotating rotors crush feed material of up to 27 m3 edge length Located centrally between the two rotors is an anvil which directs the processed material onto grate baskets These grates, which serve to restrict the amount of oversize, are mounted on a grate carriage and can be completely withdrawn from the crusher housing for servicing and maintenance purposes

Rotor

The rotor body together with shaft and bearings forms the „heart“ of the hammer crusher Each rotor comprises a central shaft onto which discs are affixed Between the discs, freeswinging hammers are mounted on hammer bolts extending over the full width of the crusher Turning and replacement of the hammers is facilitated by a hydraulic hammer bolt removal device together with a special lifting tool

Method of operation

The feed material is processed in three stages:

1) The first stage is effected by percussion and impact as the material is gravityfed into the tip circle of the hammers

2) The material then passes onto the anvil located centrally between the rotors, where it is crushed further by percussion and shear forces

3) The material flow is spread over the following discharge grates, where the product granulometry is separated and discharged through the grates Any remaining material continues to be processed until it, too, can pass through the grate gap The grate bar gap spacing determines the end product size

Assembly aids

HDStype hammer crushers are provided with a rotor turning device, by means of which the rotors can be moved and locked in the appropriate position for hammer changing For hammer changing, the hammers are fitted into a holding device and secured in position With a hydraulic aid, the hammer bolts can then be extracted and/or inserted The use of a grate carriage enables the grates to be withdrawn from the crusher housing and returned to their original position afterwards

Special features

+ machines have excellent accessibility to facilitate servicing and maintenance work and thus minimise down time Moreover, the tools and personnel required for such tasks are reduced to a minimum

+ The crusher housing is lined with handy and easily replaceable wear plates

+ All hammer crushers are fitted with a key transfer system, which prevents unauthorised opening of the housing during operation and prevents motor startup whilst  work is being carried out on the open crusher

+ The modern and generouslyequipped fabricating facilities in the Dülmen works guarantee machines and products of the highest quality

+ Installation, repair, modification and assembly work is carried out by highlytrained and experienced personnel, if necessary in shift work around the clock Naturally, as part of the service, offers contracts for aftersales inspection as well as for the acquisition of spare and wear parts

Contact us if you need more details on Elevator. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Lift、Double-Shaft Hammer Crushers HDS. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Products